EW-10
Ideal for laboratories, schools and general light duty indoor use, this wall mounted eye/face wash unit executive standard is ANSIZ358.1-2014 (American Standard), Pop-off dust covers protect the twin spray head from contaminants, and are lifted off by the water jets upon operation via the push plate.
Wall Mounted Eye Wash
EW-10
Wall Mounted Face/Eye Wash
(Push Type)(Head&Cover integral)
SPECIFICATION
Material: SS304
Surface treatment: fine polishing, increase product corrosion resistance
Valve: two piece stay open valve
Nominal pressure: 1.0Mpa
Working pressure: 0.2 ~0.4Mpa
Test pressure: 1.5Mpa
Ambient temperature: 0°C～40°C
Face/eye wash water flow: ≥11.4 L/min
Eyewash water flow: ≥1.5 L/min
Eye wash bowl : diameter 300mm, straight edge design, concentrated water, reduce splash
Spray head: dual flow control valve, manually adjustable flow
Inlet size: ½ inch female thread
Drain size: 1 "inch internal thread
Spray head spacing: 170mm
Installation features: easy installation, space saving
Executive standard: ANSIZ358.1-2014 (American Standard)
